Major refactoring of files and add pipewire tweaks

config/README.md

@@ -0,0 +1,5 @@
+- `desktop-audio` - Contains JACK fixes to allow using headphones and speakers at the same time
+- `distrobox` - Declaritive files for distrobox images
+- `pipewire-tweaks` - Tweaks to pipewire to increase performance ([docs](https://gitlab.freedesktop.org/pipewire/pipewire/-/wikis/Performance-tuning))
+- `steam-firewall` - Firewall settings for steam to open the port for P2P downloads
+- `yafti` - Yafti launcher configurations

config/files/pipewire-tweaks/etc/security/limits.d/95-pipewire.conf

@@ -0,0 +1,4 @@
+# Default limits for users of pipewire
+@pipewire - rtprio 95
+@pipewire - nice -19
+@pipewire - memlock 4194304

config/files/pipewire-tweaks/etc/sysconfig/rtkit

@@ -0,0 +1,13 @@
+RTKIT_ARGS="--scheduling-policy=FIFO
+--our-realtime-priority=89
+--max-realtime-priority=88
+--min-nice-level=-19
+--rttime-usec-max=2000000
+--users-max=100
+--processes-per-user-max=1000
+--threads-per-user-max=10000
+--actions-burst-sec=10
+--actions-per-burst-max=1000
+--canary-cheep-msec=30000
+--canary-watchdog-msec=60000
+"

files/files/8bitdo-ultimate/etc/udev/rules.d/99-8bitdo-ultimate-xinput.rules

@@ -1,4 +0,0 @@
-SUBSYSTEM=="usb", ATTR{idVendor}=="2dc8", ATTR{idProduct}=="3106", ATTR{manufacturer}=="8BitDo", RUN+="/usr/bin/systemctl start 8bitdo-ultimate-xinput@2dc8:3106"
-
-# This device is connected when the above device disconnects
-SUBSYSTEM=="usb", ATTR{idVendor}=="2dc8", ATTR{idProduct}=="3109", ATTR{manufacturer}=="8BitDo", RUN+="/usr/bin/systemctl stop 8bitdo-ultimate-xinput@2dc8:3106"

files/files/8bitdo-ultimate/lib/systemd/system/8bitdo-ultimate-xinput@.service

@@ -1,6 +0,0 @@
-[Unit]
-Description=8BitDo Ultimate Controller XInput Mode Xbobxdrv Daemon
-
-[Service]
-Type=simple
-ExecStart=/usr/bin/xboxdrv --mimic-xpad --silent --type xbox360 --device-by-id %I --force-feedback

files/files/framework-13/etc/systemd/system/frpintd.service

@@ -1,48 +0,0 @@
-[Unit]
-Description=Fingerprint Authentication Daemon
-Documentation=man:fprintd(1)
-
-[Service]
-Type=dbus
-BusName=net.reactivated.Fprint
-ExecStart=/usr/libexec/fprintd
-
-# Filesystem lockdown
-ProtectSystem=strict
-ProtectKernelTunables=true
-ProtectKernelLogs=true
-ProtectControlGroups=true
-# This always corresponds to /var/lib/fprint
-StateDirectory=fprint
-StateDirectoryMode=0700
-ProtectHome=true
-PrivateTmp=true
-
-SystemCallFilter=@system-service
-
-# Network
-RestrictAddressFamilies=AF_UNIX AF_LOCAL AF_NETLINK
-
-# Execute Mappings
-MemoryDenyWriteExecute=true
-
-# Modules
-ProtectKernelModules=true
-
-# Real-time
-RestrictRealtime=true
-
-# Privilege escalation
-NoNewPrivileges=true
-
-# Protect clock, allow USB and SPI device access
-ProtectClock=yes
-DeviceAllow=char-usb_device rw
-DeviceAllow=char-spi rw
-DeviceAllow=char-hidraw rw
-
-# Allow tuning USB parameters (wakeup and persist)
-ReadWritePaths=/sys/devices
-
-[Install]
-WantedBy=multi-user.target

files/files/framework-13/etc/tlp.d/50-framework.conf

@@ -1,134 +0,0 @@
-# ------------------------------------------------------------------------------
-# /etc/tlp.conf - TLP user configuration (version 1.4)
-# See full explanation: https://linrunner.de/tlp/settings
-#
-# Settings are read in the following order:
-#
-# 1. Intrinsic defaults
-# 2. /etc/tlp.d/*.conf - Drop-in customization snippets
-# 3. /etc/tlp.conf     - User configuration (this file)
-#
-# Notes:
-# - In case of identical parameters, the last occurence has precedence
-# - This also means, parameters enabled here will override anything else
-# - However you may append values to a parameter already defined as intrinsic
-#   default or in a previously read file: use PARAMETER+="add values"
-# - IMPORTANT: all parameters here are disabled; remove the leading '#' if you
-#   like to enable a feature without default or have a value different from the
-#   default
-# - Default *: intrinsic default that is effective when the parameter is missing
-#     or disabled by a leading '#'; use PARAM="" to disable an intrinsic default
-# - Default <none>: do nothing or use kernel/hardware defaults
-# -
-# ------------------------------------------------------------------------------
-# tlp - Parameters for power saving
-#
-# Settings based on Framework's guidance: https://knowledgebase.frame.work/en_us/optimizing-fedora-battery-life-r1baXZh
-
-# Select a CPU frequency scaling governor.
-# Intel processor with intel_pstate driver:
-#   performance, powersave(*).
-# Intel processor with intel_cpufreq driver (aka intel_pstate passive mode):
-#   conservative, ondemand, userspace, powersave, performance, schedutil(*).
-# Intel and other processor brands with acpi-cpufreq driver:
-#   conservative, ondemand(*), userspace, powersave, performance, schedutil(*).
-# Use tlp-stat -p to show the active driver and available governors.
-# Important:
-#   Governors marked (*) above are power efficient for *almost all* workloads
-#   and therefore kernel and most distributions have chosen them as defaults.
-#   You should have done your research about advantages/disadvantages *before*
-#   changing the governor.
-# Default: <none>
-
-CPU_SCALING_GOVERNOR_ON_AC=performance
-CPU_SCALING_GOVERNOR_ON_BAT=powersave
-
-# Set Intel CPU energy/performance policies HWP.EPP and EPB:
-#   performance, balance_performance, default, balance_power, power.
-# Values are given in order of increasing power saving.
-# Notes:
-# - HWP.EPP: requires kernel 4.10, intel_pstate scaling driver and Intel Core i
-#   6th gen. or newer CPU
-# - EPB: requires kernel 5.2 or module msr and x86_energy_perf_policy from
-#   linux-tools, intel_pstate or intel_cpufreq scaling driver and Intel Core i
-#   2nd gen. or newer CPU
-# - When HWP.EPP is available, EPB is not set
-# Default: balance_performance (AC), balance_power (BAT)
-
-CPU_ENERGY_PERF_POLICY_ON_AC=performance
-CPU_ENERGY_PERF_POLICY_ON_BAT=power
-
-# Set Intel CPU P-state performance: 0..100 (%).
-# Limit the max/min P-state to control the power dissipation of the CPU.
-# Values are stated as a percentage of the available performance.
-# Requires intel_pstate or intel_cpufreq driver and Intel Core i 2nd gen. or
-# newer CPU.
-# Default: <none>
-
-CPU_MIN_PERF_ON_AC=0
-CPU_MAX_PERF_ON_AC=100
-CPU_MIN_PERF_ON_BAT=0
-CPU_MAX_PERF_ON_BAT=30
-
-# Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature:
-#   0=disable, 1=allow.
-# Note: a value of 1 does *not* activate boosting, it just allows it.
-# Default: <none>
-
-CPU_BOOST_ON_AC=1
-CPU_BOOST_ON_BAT=0
-
-# Set the Intel CPU HWP dynamic boost feature:
-#   0=disable, 1=enable.
-# Requires intel_pstate scaling driver in 'active' mode and Intel Core i
-# 6th gen. or newer CPU.
-# Default: <none>
-
-CPU_HWP_DYN_BOOST_ON_AC=1
-CPU_HWP_DYN_BOOST_ON_BAT=0
-
-# Select platform profile:
-#   performance, balanced, low-power.
-# Controls system operating characteristics around power/performance levels,
-# thermal and fan speed. Values are given in order of increasing power saving.
-# Note: check the output of tlp-stat -p to determine availability on your
-# hardware and additional profiles such as: balanced-performance, quiet, cool.
-# Default: <none>
-
-PLATFORM_PROFILE_ON_AC=performance
-PLATFORM_PROFILE_ON_BAT=low-power
-
-# Set the min/max/turbo frequency for the Intel GPU.
-# Possible values depend on your hardware. For available frequencies see
-# the output of tlp-stat -g.
-# Default: <none>
-
-INTEL_GPU_MIN_FREQ_ON_AC=100
-INTEL_GPU_MIN_FREQ_ON_BAT=100
-INTEL_GPU_MAX_FREQ_ON_AC=1300
-INTEL_GPU_MAX_FREQ_ON_BAT=800
-INTEL_GPU_BOOST_FREQ_ON_AC=1300
-INTEL_GPU_BOOST_FREQ_ON_BAT=1100
-
-# Wi-Fi power saving mode: on=enable, off=disable.
-# Default: off (AC), on (BAT)
-
-#WIFI_PWR_ON_AC=off
-WIFI_PWR_ON_BAT=off
-
-# PCIe Active State Power Management (ASPM):
-#   default(*), performance, powersave, powersupersave.
-# (*) keeps BIOS ASPM defaults (recommended)
-# Default: <none>
-
-#PCIE_ASPM_ON_AC=default
-PCIE_ASPM_ON_BAT=powersupersave
-
-# Exclude PCIe devices assigned to the listed drivers from Runtime PM.
-# Note: this preserves the kernel driver default, to force a certain state
-# use RUNTIME_PM_ENABLE/DISABLE instead.
-# Separate multiple drivers with spaces.
-# Default: "mei_me nouveau radeon", use "" to disable completely.
-
-RUNTIME_PM_DRIVER_DENYLIST=""
-

files/files/usr/share/pipewire/pipewire.conf.d/max-quantum.conf

@@ -1,3 +0,0 @@
-context.properties = {
-    default.clock.max-quantum = 1024
-}

files/files/usr/share/ublue-os/just/custom.just

@@ -1,17 +0,0 @@
-!include /usr/share/ublue-os/just/bling.just
-
-# Install all flatpaks defined in recipe.yml
-setup-flatpaks:
-  #!/usr/bin/env bash
-  echo 'Installing flatpaks from the ublue recipe ...'
-  flatpaks=$(yq -- '.firstboot.flatpaks[]' "/usr/share/ublue-os/recipe.yml")
-  for pkg in $flatpaks; do \
-      echo "Installing: ${pkg}" && \
-      flatpak install --user --noninteractive flathub $pkg; \
-  done
-
-# Include some of your custom scripts here!
-
-# Add boot parameters needed for a Framework 13 laptop
-framework-13:
-  rpm-ostree kargs --append="module_blacklist=hid_sensor_hub" --append="nvme.noacpi=1" --append="tpm_tis.interrupts=0"

recipes/common/common.yml

@@ -0,0 +1,2 @@
+modules:
+  - type: signing

recipes/common/dev-packages.yml

@@ -1,5 +1,5 @@
 modules:
-  - from-file: modules/docker-engine.yml
+  - from-file: common/docker-engine.yml
   - type: script
     scripts:
       - setup-kubectl.sh

recipes/common/gaming.yml

@@ -0,0 +1,6 @@
+modules:
+  - type: files
+    files:
+      - steam-firewall: /usr
+  - type: r2modman
+    version: 3.1.48

recipes/common/jp-common.yml

@@ -0,0 +1,12 @@
+modules:
+  - from-file: common/common.yml
+  - from-file: common/pipewire-tweaks.yml
+  - from-file: common/jp-packages.yml
+  - from-file: common/gaming.yml
+  - from-file: common/dev-packages.yml
+  - type: files
+    files:
+      - distrobox: /usr
+  - type: fonts
+    nerdfont:
+      - JetBrainsMono

recipes/common/jp-desktop.yml

@@ -0,0 +1,5 @@
+modules:
+  - type: files
+    files:
+      - desktop-audio: /usr
+  - from-file: common/jp-common.yml

recipes/common/jp-laptop.yml

@@ -0,0 +1,6 @@
+modules:
+  - type: rpm-ostree
+    install:
+      - fprintd
+      - fprintd-pam
+  - from-file: common/jp-common.yml

recipes/common/jp-packages.yml

@@ -4,7 +4,7 @@ modules:
       - install-syncthing.sh
   - type: rpm-ostree
     repos:
-      - https://pkgs.tailscale.com/stable/fedora/%OS_VERSION%/tailscale.repo
+      - https://pkgs.tailscale.com/stable/fedora/tailscale.repo
     install:
       - libadwaita
       - cronie
@@ -17,4 +17,3 @@ modules:
       - strawberry
       - xclip
       - bat
-

recipes/common/pipewire-tweaks.yml

@@ -0,0 +1,3 @@
+type: files
+files:
+- pipewire-tweaks: /usr

recipes/cp-laptop.yml

@@ -6,7 +6,6 @@ modules:
   - type: files
     files:
       - usr: /usr
-  - from-file: modules/framework.yml
   - type: rpm-ostree
     install:
       - libadwaita

recipes/jp-desktop-40.yml

@@ -3,11 +3,4 @@ base-image: ghcr.io/ublue-os/bazzite-nvidia
 image-version: latest
 description: The image of Wunker OS for JP's desktop gaming.
 modules:
-  - type: signing
+  - from-file: common/jp-desktop.yml
-  - type: files
-    files:
-      - steam-firewall: /usr
-      - desktop-audio: /usr
-  - from-file: modules/jp-apps.yml
-  - from-file: modules/gaming.yml
-  - from-file: modules/dev-packages.yml

recipes/jp-desktop.yml

@@ -3,11 +3,4 @@ base-image: ghcr.io/ublue-os/bazzite-nvidia
 image-version: 39
 description: The image of Wunker OS for JP's desktop gaming.
 modules:
-  - type: signing
+  - from-file: common/jp-desktop.yml
-  - type: files
-    files:
-      - steam-firewall: /usr
-      - desktop-audio: /usr
-  - from-file: modules/jp-apps.yml
-  - from-file: modules/gaming.yml
-  - from-file: modules/dev-packages.yml

recipes/jp-laptop-40.yml

@@ -3,11 +3,4 @@ base-image: ghcr.io/ublue-os/bazzite
 image-version: latest
 description: The image of Wunker OS for JP's Laptop.
 modules:
-  - type: signing
+  - from-file: common/jp-laptop.yml
-  - from-file: modules/jp-apps.yml
-  - type: rpm-ostree
-    install:
-      - fprintd
-      - fprintd-pam
-  - from-file: modules/gaming.yml
-  - from-file: modules/dev-packages.yml

recipes/jp-laptop.yml

@@ -3,11 +3,4 @@ base-image: ghcr.io/ublue-os/bazzite
 image-version: 39
 description: The image of Wunker OS for JP's Laptop.
 modules:
-  - type: signing
+  - from-file: common/jp-laptop.yml
-  - from-file: modules/jp-apps.yml
-  - type: rpm-ostree
-    install:
-      - fprintd
-      - fprintd-pam
-  - from-file: modules/gaming.yml
-  - from-file: modules/dev-packages.yml

recipes/modules/framework.yml

@@ -1,10 +0,0 @@
-modules:
-  - type: files
-    files:
-      - framework-13: /usr
-  - type: rpm-ostree
-    install:
-      - fprintd
-      - fprintd-pam
-      - tlp
-      - powertop

recipes/modules/gaming.yml

@@ -1,3 +0,0 @@
-modules:
-  - type: r2modman
-    version: 3.1.48

recipes/modules/jp-apps.yml

@@ -1,9 +0,0 @@
-modules:
-  - type: files
-    files:
-      - usr: /usr
-      - distrobox: /usr
-  - from-file: modules/jp-packages.yml
-  - type: fonts
-    nerdfont:
-      - JetBrainsMono